-
Nylon Locking Nut - NYLSTOP - TYPE P- Standard version - sizes M2.5 - M52
- Re-usable up to 15 times
- Vibration resistant nylon ring locking mechanism
-
Nylon Locking Nut - NYLSTOP - TYPE T- Low profile version - sizes M2.5 - M52
- Re-usable up to 15 times
- Vibration resistant nylon ring locking mechanism
-
High temperature Locking Nut - MHT- Available in sizes M5 - M20
- Operating temperature range up to 120°C
- Vibration resistant 6-beam locking mechanism
-
Bearing Nut - CNCF- One-piece bearing nut
- Reduced installation time and cost
- Vibration resistant nylon locking mechanism
-
5F Series - Quarter Turn- Max. tensile strength 670 N, working load 450 N.
- Plastic washer stud assembly to protect decorative surfaces.
- Spring loaded receptacle.
-
99F Series - Quarter Turn- Max. tensile strength 700 N, working load 480 N
- Increased grip range
- Encapsulated design, splash-proof
- Externally threaded receptacles for use in castings or panels
-
Keenserts® Solid Inserts- Significantly increases load capability in weaker materials
- Special "kees" lock the Keensert into place, eliminating rotation
- Easy to install - no special taps required and no tangs to remove
- Defect threads can be renewed with same nominal diameter
-
50F 650N Series - Quarter Turn- Max. tensile strength 900 N, working load 650 N
- Stud assembly incorporates a plastic washer to protect decorative surfaces
- Snap-in or clip-on spring loaded receptacle
- Snap-in grommet for quick stud installation without a retaining washer
-
50F 2600N Series - Quarter Turn- Max. tensile strength 3700 N, working load 2600 N
- Small fastener giving high tensile load
- Flat receptacle
- High preload
-
2600 SERIES - QUARTER TURN- Max. tensile strength 1,330 N, working load 900 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
2700 SERIES - QUARTER TURN- Max. tensile strength 1,000 N, working load 700 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
D4002 SERIES - QUARTER TURN- Max. tensile strength 4,700 N, working load 3,100 N
- Small fastener for high tensile load
- Large range of stud assemblies with fixed and floating receptacles
Search
Get in Touch
Our team of experts will be glad to answer your questions.
