The range of quick release fasteners, draw latches & solid inserts from Camloc brings together over 75 years worth of experience, traditional engineering skill and innovation, providing customers with effective, reliable and creative solutions for applications in electronics, industrial, green energy, transportation, aerospace and defence markets.
-
5F Series - Quarter Turn
- Max. tensile strength 670 N, working load 450 N.
- Plastic washer stud assembly to protect decorative surfaces.
- Spring loaded receptacle.
-
V34F Series - Quarter Turn
- Max. tensile strength 44,482 N, working load 28,913 N.
- Capable of absorbing high tensile loads
- Capable of withstanding mechanical damage under severe operating conditions.
- Adjustable clamp lengths within a chosen grip length.
-
99F Series - Quarter Turn
- Max. tensile strength 700 N, working load 480 N
- Increased grip range
- Encapsulated design, splash-proof
- Externally threaded receptacles for use in castings or panels
-
Keenserts® Solid Inserts
- Significantly increases load capability in weaker materials
- Special "kees" lock the Keensert into place, eliminating rotation
- Easy to install - no special taps required and no tangs to remove
- Defect threads can be renewed with same nominal diameter
-
50F 900N Series - Quarter Turn
- Max. tensile strength 900 N, working load 650 N
- Stud assembly incorporates a plastic washer to protect decorative surfaces
- Snap-in or clip-on spring loaded receptacle
- Snap-in grommet for quick stud installation without a retaining washer
-
50F 3700N Series - Quarter Turn
- Max. tensile strength 3,700 N, working load 2,600 N
- Small fastener giving high tensile load
- Flat receptacle
- High preload
-
2600 SERIES - QUARTER TURN
- Max. tensile strength 1,330 N, working load 900 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
2700 SERIES - QUARTER TURN
- Max. tensile strength 1,000 N, working load 700 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
D4002 SERIES - QUARTER TURN
- Max. tensile strength 4,700 N, working load 3,100 N
- Small fastener for high tensile load
- Large range of stud assemblies with fixed and floating receptacles
-
991F SERIES - QUARTER TURN
- Max. tensile strength 10,000 N, working load 7,000 N
- High tensile strength and preload
- Typical applications: Commercial vehicles, coaches, agricultural machinery, chemical engineering, heating systems etc
-
15F SERIES - PUSH BUTTON
- Max. tensile strength 1,330 N, working load 930 N
- Quick opening and closing by a push of the finger
- Easy installation with single hole mounting
-
Need some help finding the perfect solution?
Speak to our expert support team