-
Camloc D4002 Series - Quarter Turn FastenerThe product configuration is dependent on the selections you make from the dropdown boxes. Once you have made your selections the component part numbers and details will appear below.
-
5F Series - Quarter Turn- Max. tensile strength 670 N, working load 450 N.
- Plastic washer stud assembly to protect decorative surfaces.
- Spring loaded receptacle.
-
Keenserts® Solid Inserts- Significantly increases load capability in weaker materials
- Special "kees" lock the Keensert into place, eliminating rotation
- Easy to install - no special taps required and no tangs to remove
- Defect threads can be renewed with same nominal diameter
-
PT10 SERIES - PUSH-TURN- Max. tensile strength 1,200 N, working load 800 N
- 1/4 turn to open, close with a push of the finger
- Wide grip range
-
V951L SERIES LATCH- Max. tensile strength 2,300 N, working load max 1,550 N
- Adjustable drawhook
- Available with secondary lock and hasp
-
Tanged Wire Thread Inserts- Strengthen threads in weaker materials such as aluminium
- Free running and locking versions available
- Available in a range of materials and coatings
-
Tangless® Wire Thread Inserts- Strengthen threads in weaker materials such as aluminium
- No tang to remove, or count post-installation
- No risk of losing tang in safety critical applications
-
50F 650N Series - Quarter Turn- Max. tensile strength 900 N, working load 650 N
- Stud assembly incorporates a plastic washer to protect decorative surfaces
- Snap-in or clip-on spring loaded receptacle
- Snap-in grommet for quick stud installation without a retaining washer
-
991F SERIES - QUARTER TURN- Max. tensile strength 10,000 N, working load 7,000 N
- High tensile strength and preload
- Typical applications: Commercial vehicles, coaches, agricultural machinery, chemical engineering, heating systems etc
-
Magna-Bulb®- Ideal for lower strength or thin sheet joint materials
- High Mechanical Performance (Best in class)
- Very high shear strength and high tensile strength
-
50F 2600N Series - Quarter Turn- Max. tensile strength 3700 N, working load 2600 N
- Small fastener giving high tensile load
- Flat receptacle
- High preload
Search
Get in Touch
Our team of experts will be glad to answer your questions.
