The Recoil range of installation tooling includes tools, drivers, There are a number of options for installing Tangless® and Tanged inserts – using a prewinder, or standard hand tools, pneumatic tools, electric and battery tools.
The optimal selection of tooling is based on the type of application and how many inserts will be installed.
The Recoil range of installation tooling includes tools, drivers, There are a number of options for installing Tangless® and Tanged inserts – using a prewinder, or standard hand tools, pneumatic tools, electric and battery tools.
The optimal selection of tooling is based on the type of application and how many inserts will be installed.
-
5F Series - Quarter Turn- Max. tensile strength 670 N, working load 450 N.
- Plastic washer stud assembly to protect decorative surfaces.
- Spring loaded receptacle.
-
V34F Series - Quarter Turn- Max. tensile strength 44,482 N, working load 28,913 N.
- Capable of absorbing high tensile loads
- Capable of withstanding mechanical damage under severe operating conditions.
- Adjustable clamp lengths within a chosen grip length.
-
50F 650N Series - Quarter Turn- Max. tensile strength 900 N, working load 650 N
- Stud assembly incorporates a plastic washer to protect decorative surfaces
- Snap-in or clip-on spring loaded receptacle
- Snap-in grommet for quick stud installation without a retaining washer
-
50F 2600N Series - Quarter Turn- Max. tensile strength 3700 N, working load 2600 N
- Small fastener giving high tensile load
- Flat receptacle
- High preload
-
2600 SERIES - QUARTER TURN- Max. tensile strength 1,330 N, working load 900 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
2700 SERIES - QUARTER TURN- Max. tensile strength 1,000 N, working load 700 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
D4002 SERIES - QUARTER TURN- Max. tensile strength 4,700 N, working load 3,100 N
- Small fastener for high tensile load
- Large range of stud assemblies with fixed and floating receptacles
-
991F SERIES - QUARTER TURN- Max. tensile strength 10,000 N, working load 7,000 N
- High tensile strength and preload
- Typical applications: Commercial vehicles, coaches, agricultural machinery, chemical engineering, heating systems etc
-
715F SERIES - PUSH-TURN- Max. tensile strength 700 N, working load 600 N
- Easy and economic clip-in installation for stud and receptacle
- Also suitable for automatic installation
-
716F SERIES - PUSH-TURN- Max. tensile strength 1,400 N, working load 1,200 N
- Easy and economic clip-in installation for stud and receptacle
- Also suitable for automatic installation
-
PT10 SERIES - PUSH-TURN- Max. tensile strength 1,200 N, working load 800 N
- 1/4 turn to open, close with a push of the finger
- Wide grip range
-
V934L SERIES LATCH- Max. tensile strength 550 N, working load 310 N
- Available with a secondary lock
- Carbon and stainless steel version available
