The Recoil range of installation tooling includes tools, drivers, There are a number of options for installing Tangless® and Tanged inserts – using a prewinder, or standard hand tools, pneumatic tools, electric and battery tools.
The optimal selection of tooling is based on the type of application and how many inserts will be installed.
The Recoil range of installation tooling includes tools, drivers, There are a number of options for installing Tangless® and Tanged inserts – using a prewinder, or standard hand tools, pneumatic tools, electric and battery tools.
The optimal selection of tooling is based on the type of application and how many inserts will be installed.
-
5F Series - Quarter Turn- Max. tensile strength 670 N, working load 450 N.
- Plastic washer stud assembly to protect decorative surfaces.
- Spring loaded receptacle.
-
V34F Series - Quarter Turn- Max. tensile strength 44,482 N, working load 28,913 N.
- Capable of absorbing high tensile loads
- Capable of withstanding mechanical damage under severe operating conditions.
- Adjustable clamp lengths within a chosen grip length.
-
50F 650N Series - Quarter Turn- Max. tensile strength 900 N, working load 650 N
- Stud assembly incorporates a plastic washer to protect decorative surfaces
- Snap-in or clip-on spring loaded receptacle
- Snap-in grommet for quick stud installation without a retaining washer
-
2600 SERIES - QUARTER TURN- Max. tensile strength 1,330 N, working load 900 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
2700 SERIES - QUARTER TURN- Max. tensile strength 1,000 N, working load 700 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
15F SERIES - PUSH BUTTON- Max. tensile strength 1,330 N, working load 930 N
- Quick opening and closing by a push of the finger
- Easy installation with single hole mounting
