The Recoil range of installation tooling includes tools, drivers, There are a number of options for installing Tangless® and Tanged inserts – using a prewinder, or standard hand tools, pneumatic tools, electric and battery tools.
The optimal selection of tooling is based on the type of application and how many inserts will be installed.
The Recoil range of installation tooling includes tools, drivers, There are a number of options for installing Tangless® and Tanged inserts – using a prewinder, or standard hand tools, pneumatic tools, electric and battery tools.
The optimal selection of tooling is based on the type of application and how many inserts will be installed.
-
5F Series - Quarter Turn- Max. tensile strength 670 N, working load 450 N.
- Plastic washer stud assembly to protect decorative surfaces.
- Spring loaded receptacle.
-
V34F Series - Quarter Turn- Max. tensile strength 44,482 N, working load 28,913 N.
- Capable of absorbing high tensile loads
- Capable of withstanding mechanical damage under severe operating conditions.
- Adjustable clamp lengths within a chosen grip length.
-
99F Series - Quarter Turn- Max. tensile strength 700 N, working load 480 N
- Increased grip range
- Encapsulated design, splash-proof
- Externally threaded receptacles for use in castings or panels
-
50F 650N Series - Quarter Turn- Max. tensile strength 900 N, working load 650 N
- Stud assembly incorporates a plastic washer to protect decorative surfaces
- Snap-in or clip-on spring loaded receptacle
- Snap-in grommet for quick stud installation without a retaining washer
-
2600 SERIES - QUARTER TURN- Max. tensile strength 1,330 N, working load 900 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
2700 SERIES - QUARTER TURN- Max. tensile strength 1,000 N, working load 700 N
- Small fastener giving a high tensile load
- Wide range of stud head styles and receptacles
-
D4002 SERIES - QUARTER TURN- Max. tensile strength 4,700 N, working load 3,100 N
- Small fastener for high tensile load
- Large range of stud assemblies with fixed and floating receptacles
-
991F SERIES - QUARTER TURN- Max. tensile strength 10,000 N, working load 7,000 N
- High tensile strength and preload
- Typical applications: Commercial vehicles, coaches, agricultural machinery, chemical engineering, heating systems etc
-
15F SERIES - PUSH BUTTON- Max. tensile strength 1,330 N, working load 930 N
- Quick opening and closing by a push of the finger
- Easy installation with single hole mounting
-
V964L SERIES - PAWL LATCH- Wide grip range (total thickness G up to 15mm)
- Suitable for a large range of applications
- Easy installation with single hole mounting
-
V936F SERIES - ONE PIECE- Max. tensile strength 300 N, working load 200 N
- Available in slotted recess or knurled head styles
- Same hole shape for panel and frame
-
52F SERIES - QUARTER TURN- Simple, economic fasteners for lids etc
- Easy installation by blind riveting
- Quarter turn locking feature
