ISO-10303-21;
HEADER;
FILE_DESCRIPTION( (''), '2;1');
FILE_NAME( '2600_CLRNH.stp', '2010-09-02T15:34:01-04:00', (''), (''), 'ST-DEVELOPER v11', 'SIEMENS PLM Software NX 7.0', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#81=PRODUCT_DEFINITION_SHAPE('','',#82);
#82=PRODUCT_DEFINITION(' ','',#84,#83);
#83=DESIGN_CONTEXT('',#93,'design');
#84=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE(' ',' ',#86,.NOT_KNOWN.);
#85=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#86));
#86=PRODUCT('2600_CLR_stp','2600_CLR_stp',' ',(#91));
#89=PRODUCT_CATEGORY('part',' ');
#90=PRODUCT_CATEGORY(' ','');
#91=MECHANICAL_CONTEXT(' ',#93,'mechanical');
#92=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#93);
#93=APPLICATION_CONTEXT( 'configuration controlled 3D designs of mechanical parts and assemblies');
#11676=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#11677)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#11682,#11679,#11678)) REPRESENTATION_CONTEXT('2600_CLRNH','TOP_LEVEL_ASSEMBLY_PART') );
#11677=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.00393700787401575), #11682,'DISTANCE_ACCURACY_VALUE','Maximum Tolerance applied to model');
#11678=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#11679=( CONVERSION_BASED_UNIT('DEGREE',#11680) NAMED_UNIT(#11684) PLANE_ANGLE_UNIT() );
#11680=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#11681);
#11681=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#11682=( CONVERSION_BASED_UNIT('INCH',#11685) LENGTH_UNIT() NAMED_UNIT(#11683) );
#11683=DIMENSIONAL_EXPONENTS(1.,0.,0.,0.,0.,0.,0.);
#11684=DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
#11685=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(25.4),#11686);
#11686=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
ENDSEC;
END-ISO-10303-21;